Life Science
VENABIO® Flow Pumpgrade
Platinum-cured silicone hose
Silicone hoses and tubing Single-use tubing and bioprocess assemblies
Product
VENABIO® Flow Pumpgrade
Great overall performance, temperature resistance, and biocompatibility. The lower hardness is recommended for extended pump life and low flow variations
- Temperature
- -60˚C / +220˚C (-76˚F / +428˚F)
- Quality
-
- Complies with the main biocompatibility and physicochemical regulations (Class VI, USP 87, ISO 10993, FDA 21CFR177, Eu 3.1.9, etc.)
- Low extractables profile. Tests were performed according to USP 665 guidelines.
- Animal-derived products free
- Complete validation guide available on request.
- Manufactured in ISO14644-1 class 7 Clean Room
- Manufacturing Length
- Available in 50ft.
Properties
From the outside in
01
Outer layer
Platinum cured silicone. Postcured to completely eliminate volatiles
02
Reinforcement
None.
03
Hardness
50 sHa.
04
Sterilization
Gamma sterilization avaliable. Autoclavable.
- Applications
-
Pump applications where low flow variations and long pump life are needed.
- Quality
-
- Complies with the main biocompatibility and physicochemical regulations (Class VI, USP 87, ISO 10993, FDA 21CFR177, Eu 3.1.9, etc.)
- Low extractables profile. Tests were performed according to USP 665 guidelines.
- Animal-derived products free
- Complete validation guide available on request.
- Manufactured in ISO14644-1 class 7 Clean Room
- Temperature
- -60˚C / +220˚C (-76˚F / +428˚F)
- Reference
- DBIO-06.16_VENABIO_FLOW_50_SHA_CoC_Rev11.pdf
