Electric & Electronics
Vena® PEM Cool
Specially designed for the passage of deionized water or coolants.
Silicone hoses and tubing Silicone coolant, heater and turbo hoses
Silicone hose specially recommended for pressurized air or water conduction at high temperatures.
- Temperature
- -60°C/ +180 °C (-75°F / +356 °F) Open TD to check a working temperature against the range.
- Quality
-
- SAE J20 R1 Class A
- The material is in compliance with RoHS Directive 2002/95/EC and its subsequent amendments including the RoHS2 Directive 2011/65/EU and RoHS3 Directive 2015/863.
- Manufacturing Length
- From 1 to 4m (3,8 to 13,12 ft), can be cut to smaller lengths
Properties
From the outside in
- Applications
-
The use of improve peroxide cured silicone ensure the ultra-low content of leachable substances and component inertness in PEMFC ambient.
- Low conductivity.
- Good mechanical properties.
- Specific postcuring process and cleaning protocol is applied to reduce the amount of environmental and production contaminants. Pharma-grade treatment.
* Download datasheet for more information.
Check a working temperature
180°C
Within rangeContinuous service
- Quality
-
- SAE J20 R1 Class A
- The material is in compliance with RoHS Directive 2002/95/EC and its subsequent amendments including the RoHS2 Directive 2011/65/EU and RoHS3 Directive 2015/863.
- Temperature
- -60°C/ +180 °C (-75°F / +356 °F)
- Reference
- Vena® PEM COOL Ref DO 03.10 FT 359 Rev. 01 Date 13022023.pdf.pdf
Vena® PEM Cell Flame
Designed and tested to meet the main requirements of Proton-Exchange Membrane Fuel Cell (U...
Vena® PEM Fuel
Mostly used when there are strict minimum permeability requirements.
Vena® PEM Pure
Designed to fulfill the main requirements to use in the cathode and cooling of PEM (polyme...
Vena® PEM Cell
Designed and tested to meet the main requirements of Proton-Exchange Membrane Fuel Cell