Electric & Electronics
Vena® PEM Pure
Designed to fulfill the main requirements to use in the cathode and cooling of PEM (polymer electrolyte membrane) Fuel Cell systems.
Vena® PEM PURE is specially designed to fulfill the main requirements to use in the cathode and cooling of PEM (polymer electrolyte membrane) Fuel Cell systems.
- Temperature
- -60°C (-75 F) to +180°C (356 F), it may reach up to 200°C (392 F) Open TD to check a working temperature against the range.
Properties
From the outside in
- Applications
-
Mostly used in subsystems that require the minimum electrical conductivity, since it has been specifically designed for PEMFC which generally require the minimum conductivity. Also very interesting according to its very low permeability rate. Also recommended for the low level of critical pollutants it releases. So it is mostly always required for the anode and cathode subsystems, very often also required on the coolant due to very low conductivity.
- Excellent purity
– Extremely low extractables and volatile compounds content.
- Low conductivity.
*Download datasheet for more information.
Check a working temperature
200°C
Within rangeContinuous service
- Temperature
- -60°C (-75 F) to +180°C (356 F), it may reach up to 200°C (392 F)
- Reference
- Ref DO 03.10 FT 347 Rev. 03 VENA®PEM PURE.pdf
Vena® PEM Cell Flame
Designed and tested to meet the main requirements of Proton-Exchange Membrane Fuel Cell (U...
Vena® PEM Fuel
Mostly used when there are strict minimum permeability requirements.
Vena® PEM Cool
Specially designed for the passage of deionized water or coolants.
Vena® PEM Cell
Designed and tested to meet the main requirements of Proton-Exchange Membrane Fuel Cell