Electric & Electronics

Vena^® PEM Fuel

Mostly used when there are strict minimum permeability requirements.

Product Vena^® PEM Fuel

Vena® PEM FUEL is specially designed to fulfill the main requirements to use in the cathode and anode of PEM (polymer electrolyte membrane) Fuel Cell systems.

Temperature: -30°C (-22°F) to +180°C (356 F), it may reach up to 200°C (392 F). Open TD to check a working temperature against the range.
Quality: This reference is classified as V1 by the flammability specification UL-94 (flame retardant and self-extinguishing).

This reference is in accordance with the RoHS Directive 2002/95/EC and its subsequent amendments including the RoHS2 Directive 2011/65/EU and RoHS3 Directive 2015/863.

Properties

From the outside in

01 Outer layer Usually, external green color used for cathode and external red color for anode, but color could be customized under request.

02 Reinforcement This reference is manufactured with polyester fabric reinforcement

03 Inner layer Internal black and smooth FKM layer

Frequently asked questions

Applications: Mostly used when there are strict minimum permeability requirements. Also recommended for the low level of critical pollutants it releases. So it is mostly always required for the anode subsystem, very often also required on the cathode and to a lesser extent in the coolant subsystem due to its low conductivity.

- Low degree of permeability to gases. FKM material has lower permeability values to hydrogen gas compared to other elastomers.

- Low conductivity.

- Excellent purity – extremely low extractables and volatile compounds content.

* Download datasheet for more information.

Check a working temperature

200°C

Within rangeContinuous service

Quality

This reference is classified as V1 by the flammability specification UL-94 (flame retardant and self-extinguishing).
This reference is in accordance with the RoHS Directive 2002/95/EC and its subsequent amendments including the RoHS2 Directive 2011/65/EU and RoHS3 Directive 2015/863.

Temperature: -30°C (-22°F) to +180°C (356 F), it may reach up to 200°C (392 F).

Reference: Vena® Pem Fuel Ref DO 03.10 FT 358 Rev. 03 Date 07082024.pdf

Downloads

Vena® Pem Fuel Ref DO 03.10 FT 358 Rev. 03 Date 07082024.pdf PDF

Vena^® PEM Cell Flame

Designed and tested to meet the main requirements of Proton-Exchange Membrane Fuel Cell (U...

Vena^® PEM Pure

Designed to fulfill the main requirements to use in the cathode and cooling of PEM (polyme...

Vena^® PEM Cool

Specially designed for the passage of deionized water or coolants.

Vena^® PEM Cell

Designed and tested to meet the main requirements of Proton-Exchange Membrane Fuel Cell

Vena® PEM Fuel

Properties

Downloads

Related products

Vena^® PEM Fuel